Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It is discreet and does not have LED indicators or key fobs, and is hidden in the wiring of your vehicle.
The user may also turn off the system temporarily by using Transport Mode when renting out their car. This guide will walk you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning, and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique PIN code that you choose. It is undetectable by thieves using diagnostic scanners or other modern methods. It isn't able to be disabled by cutting circuits.
The system is easy to use, however it's important to have an expert installation to ensure a smooth and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programing of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer may start working safely. Hand tools are essential to make precise connections and a multimeter may be used to verify electrical values and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. Lastly, the user manual provides specific guidance tailored to your Ghost Immobiliser model.
During the installation, it is crucial to select the right grounding location that is free of any paint or debris. Installers should also ensure that the immobiliser's wires CAN H and can L are connected to the appropriate ECU ports. Depending on the model, these wires might require soldering or plugged in. Using a top-quality connector is recommended to ensure a sturdy and secure connection.
Once the install is complete, the customer can activate Transport Mode. This permits mechanics or valet parking to use the vehicle, without having to know the pin code. The customer must press the service icon on the dashboard five times in 2 seconds. After that the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a smart option for those who regularly rents their vehicle on platforms like Turo. ghost immobiliser 2 can cut down on insurance costs, since it lowers the chance of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser in order to guard your car from theft. The device prevents your vehicle from starting the case that someone steals or copies your key. This is due to its advanced technology, which is designed to prevent the engine from starting unless the correct PIN code is entered.
The device connects to the vehicle's bus system CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence, which only you know. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the steps to avoid electrical issues and malfunctions in the system. You'll need to locate a power supply of 12V and a good grounding on the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a strong connection. Connect the connections with heat shrink tubing or insulation tape, as well as other materials to prevent short circuits of electricity.
Once the wires are connected, you are able to reconnect the battery and turn on the engine to test the immobiliser's functionality. Once everything is working properly then you can put it in a safe location under the dash or somewhere else in the vehicle. Be sure to conceal it securely to ensure that thieves cannot alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it's a top-quality deterrent to car burglars. It provides superior protection against key cloning, hacking and relay attacks, and isn't able to be disabled unless you know the code. It is simple to use and can be set to an option for a service valet so that your vehicle won't be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It connects directly to your car's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems which require the removal of circuit elements.
The system is also inaccessible by thieves using diagnostic scanning tools. This is due to the fact that it doesn't transmit and receive radio frequency signals, and it uses the CAN data to communicate with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now begin driving your car safely.
Once installed, Ghost Immobiliser protects your car against hacking or key cloning while also protecting its value. If you have to surrender your vehicle for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and a grounding point. Make sure that both are well-insulated and can be touched. It is also recommended to use cable tie to secure and bundle the wires. This reduces the risk of theft by thieves. Be sure to double-check the locations of these points to avoid committing a mistake and mark them with a piece of tape or label. It's also a good idea to inspect every connection for signs of wear and tear. Loose connections can lead to malfunctions in the system, so make certain that they are securely in place and properly insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will confirm that the unit is operating properly and that all connections and insulation are safe. If there are any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that is integrated into your car's ECU to stop unauthorised engine start. The innovative technology protects your vehicle against hacking and key cloning as well as other common methods used by thieves to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to offer the ultimate vehicle protection. The Ghost's unique features, combined with its subtle design, make it a popular option for both car enthusiasts as well as security-conscious drivers.
It is essential to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. The best place to start is to look over the wiring diagram for your vehicle, which will serve as a roadmap for locating and connecting the wires required. After that, you'll need determine the power source and grounding points. Once you've found them, you'll be required to mark the points to make them easily identifiable during installation. In addition, it is essential to use high-quality tools and materials. Hand tools are essential to help you make precise connections. A multimeter will check electrical values and guarantee security. Insulation tape and cable tie will ensure that all connections are tidy. A Ghost-specific user's guide is also available.
It is essential to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This step will confirm that the immobiliser functions in the way it was intended, preventing unauthorized vehicle starts. It is recommended to complete this routinely as part of your routine inspections of the vehicle to ensure the system is working correctly.
Once the installation is complete, you can drive your car with confidence. The Ghost will help keep your pride and joy safe from potential thieves and ensure that nobody is able to drive off with your vehicle without the proper PIN code. The Ghost can also be used with a Thatcham-approved tracker to detect any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle in the event of it being stolen.
The Ghost is compatible with a variety of automobiles, including those from all major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our service and installation options. We are a TASSA Installer who is registered which guarantees that we follow strict standards and procedures for installing our products. This ensures customers, insurance companies, and law enforcement agencies that all installations are performed safely and correctly.